manualshive.com logo in svg

Miele SmartLine Tepan Yaki, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine Tepan Yaki Скачать руководство пользователя страница 23

Operation

23

Risk of fire with overheated food.

Unattended food can overheat and
catch alight.
Do not leave the Tepan Yaki
unattended whilst it is being used.

Please note that the heating-up time
is very rapid with induction heating.

Switching on the Tepan Yaki

Touch the 

 sensor control.

Further sensor controls will light up. If
no further entry is made, the Tepan Yaki
will switch itself off after a few seconds
for safety reasons.

Setting the power level

Touch the appropriate sensor control
on the respective numerical keybank
for the power level you want.

Switching off

To switch off a Tepan zone, touch the

0

 sensor control on the numerical

keybank for that zone.

To switch off the Tepan Yaki and both
zones, touch the 

 sensor control.

Residual heat indicator

If the SmartLine element is still hot, the
residual heat indicator will light up after
it has been switched off. Depending on
the temperature, a dot will appear
above power levels 1, 2 and 3.

The dots of the residual heat indicator
go out one after the other as the
SmartLine element cools down. The last
dot only goes out when the SmartLine
element is safe to touch.

Danger of burning due to hot

surfaces.
The surfaces will be hot after
cooking.
Do not touch the surfaces while the
residual heat indicators are on.

Содержание SmartLine Tepan Yaki









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды