Miele PWM 906, Инструкции по эксплуатации и монтажу

Страница: 70 / 100

Installation and connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
70
Installation surface
A concrete floor is the most suitable
installation surface for this machine. It is
far less prone to vibration during the
spin cycle than wooden floorboards or
a surface with “soft” properties.
 The machine must be level and
securely positioned.
 To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
 Install the washing machine on a
plywood base (at least
70 x 60 x 3 cm / 27 9/16 x 23 5/8 x 1
3/16 in). The base should span
several joists and be bolted to the
joists and not only to the floorboards.
Useful tip: If possible, install the
machine in a corner of the room. This is
usually the most stable part of the floor.
Removing the shipping struts

Remove the left and right caps.
1. Pull on the secured cap stoppers
2. and use a screwdriver to release the
catches at the top and bottom.

Using the wrench supplied, turn the
left-hand shipping strut 90°.