Miele PWM 906, Инструкции по эксплуатации и монтажу

Страница: 95 / 100

Supervisor level
95
Feedb. signal to pay system
Setting the feedback signal for the
coin box.
– Factory default: Off
– End of program
The feedback signal is sent at the
end of the program.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and program end
The feedback signal is sent at the
start and end of the program.
– Program running
The feedback signal is sent
constantly between the start and end
of the program.
Clear paid signal
The “Paid” signal in coin-box mode
can be applied until the end of the
program or discarded if the program is
not started after 5 minutes.
Factory default: Off
Payment system lock
To avoid tampering, a program lock
can be set up in program operation. If
the lock is applied, the program is
interrupted and payment credit is lost
as soon as the door is opened.
The time for the lock can be adjusted to
prevent laundry being added.
– Off
– As soon as the program starts
– 1 minute after the start of the
program
– 2 minutes after the start of the
program
– 3 minutes after the start of the
program (factory default)
– 4 minutes after the start of the
program
– 5 minutes after the start of the
program
FOC programs
In coin-box mode, you can decide
whether the
Drain/Spin
program can be
used for free.
Factory default: Off