Miele PWM 906, Инструкции по эксплуатации и монтажу

Страница: 85 / 100

Supervisor level
85
Special programs
You can put together 5 special
programs and save them as your own
wash programs with your own
program names.
You must have already activated
Special programs under
Program
packages .
Enter the name of your special program
and its basic settings into the “Special
programs” table under the “Program
chart”.
– Temperature: you can select a
temperature in multiple increments
from cold to 90°C (194°F).
– Wash block: you can select one or
more wash blocks.
– Spin speed: you can select a spin
speed in increments from 600 rpm to
1,400 rpm.
Sort programs
Programs can be moved within the
program list and in the Favourites list.
Factory default: Off
Moving programs
 Touch the sensor control for the
program you want to move.

Press and hold the sensor control
until the frame changes.

Drag the program to the required
place.
Prog. colour allocation
You can assign a colour to a Favourite
program. In the list of Favourites, each
Favourites program is given a coloured
frame, which can be adjusted.
Factory default: On
Hygiene
The Maintenance wash hygiene program
is shown in the list of special
programs.
If a program at a temperature below
60°C (140°F) has been used, a request
to start the
Maintenance wash hygiene
program appears in the display.
Factory default: Off
Disinfection prog. code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 0 0 0
Make a note of your new code if you
ever change it.