background image

Warning and safety instructions

11

 

Take care to ensure that foreign objects (e.g. nails, pins, coins, pa-

per clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds con-
tainer, drum). Damaged components can damage the laundry.

 

If the correct amount of detergent is dispensed, the machine

should not need to be descaled. If, however, you do wish to descale
it, only use special non-corrosive descaling agents and strictly ob-
serve the instructions on the packaging. Special descaling agent is
available from your Miele dealer or from Miele Service. Strictly ob-
serve the instructions for the descaling agent.

 

For textiles that have been treated with solvent-based detergents,

always check whether they can be washed in a washing machine. To
check whether this is possible, refer to safety notes, information con-
cerning the product's environmental properties, and other informa-
tion.

 

Never use solvent based detergents, e.g. those containing ben-

zine, in this machine. Doing so may result in damage to component
parts and create toxic fumes. Risk of fire and explosion.

 

Benzine, petrol, paraffin, or any easily flammable liquid must not

be stored or used near the machine. Risk of fire and explosion

 

Only use dyes suitable for use in a washing machine. Always ob-

serve the manufacturer's instructions carefully.

Содержание PWM 300 SmartBiz









































































Отзывы: