Miele PWM 300 SmartBiz, Инструкции по эксплуатации и монтажу

Страница: 42 / 72

Problem solving guide
42
General problems
Problem Cause and remedy
The machine shakes
during the spin cycle. The machine feet are not level and not secured.

Level the machine and adjust the feet correctly.
Strange pump noises
can be heard.
This is not a fault. These slurping noises occur at
the start and end of a pump sequence as a normal
part of the operation.
Large amounts of deter-
gent residue remain in
the detergent dispenser
drawer. The water pressure is too low.

Clean the filters in the water inlet.
Powder detergent used in conjunction with water
softeners tends to become sticky.
 Clean the detergent dispenser drawer and, in fu-
ture, add detergent into the drawer first, and then
add the water softener.
Fabric softener is not
completely dispensed
or too much water re-
mains in the
 com-
partment.
The siphon tube is not correctly positioned or is
clogged.

Clean the siphon, see “Cleaning and care – Clean-
ing the detergent dispenser compartment”.
The laundry has not
been spun properly. The
laundry is still wet. The machine detected a high level of imbalance dur-
ing the final spin and reduced the spin speed auto-
matically.

Include both large and small items in the load as
this will achieve better distribution.
There is still liquid in the
capsule at the end of
the programme.
There is a blockage in the small pipe in the deter-
gent drawer onto which the capsule is placed.

Clean the small pipe.
Not a fault!
For technical reasons, a small amount of water will
remain in the capsule.