manualshive.com logo in svg

Miele PG 8591, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8591 Скачать руководство пользователя страница 60

Operation

60

Cleaning the filter
combination and
tubular filter

The filters in the wash cabinet must be checked daily and cleaned
regularly, see “Maintenance/Cleaning the filters in the wash cabinet”.

The A 800 tubular filter can be used in special injector manifolds on
various mobile units and baskets and must be cleaned regularly.
Follow the cleaning instructions in the operating instructions for the
tubular filter.

A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.

Clean tubular filter?

Clean filter combination?

Now

Later ( Programmes)

Now

Later ( Programmes)

Follow the instructions in the “Maintenance” section for cleaning the
filters. For the tubular filter, follow the instructions in the operating
instructions for the tubular filter.

Resetting the
counter

The counter for the cleaning interval may be reset only after
cleaning has been completed.

Tubular filter cleaned?

Filter comb. cleaned?

Yes

No

Yes

No

-

Yes

The counter is reset.

-

No

The counter will not be reset.

Select an option using the 

 and 

 arrow buttons and confirm your

choice with 

OK

.

Low fill levels

When the fill level is low in one of the containers, for example for
process chemicals or the salt container, you are prompted to refill the
container.

Refill salt

DOS  Refill

Acknowledge the messages with 

OK

 and refill the relevant

containers. To do this, follow the instructions in the sections “Filling
process chemicals and dispensing” and “Water softener”.

Содержание PG 8591

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды