manualshive.com logo in svg

Miele PG 8591, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8591 Скачать руководство пользователя страница 144

Plumbing

*INSTALLATION*

144

IMPORTANT
UK, Australia and New Zealand

For the UK, Australia and New Zealand a non-return check valve is
required between the tap and filter.

Do 

NOT

 shorten or otherwise damage the inlet hoses (see

diagram).

See installation diagram supplied.

Retrofitting the
large-surface
filter

If the water contains a high level of insoluble components, a large-
surface filter can be installed between the stopcock and the water
inlet hose. 
The large-surface filter is available from the Miele Customer Service
Department.

AD water
connection for
30-1,000 kPa (UK:
100-1,000 kPa)
pressure -
pressure-
resistant

This washer-disinfector is supplied as standard for a pressurised
system operating between 30-1,000 kPa (UK: 100-1,000 kPa). If the
water pressure is below 200 kPa the water intake duration will be
automatically increased.

The pressure tested hose for AD water, coded green, has a ¾ inch
threaded union for connection to the onsite stopcock for AD water.

If the machine is not going to be connected to demineralised

(DI) water, the DI water connection has to be deactivated by the
Miele Customer Service Department. The intake hose remains on
the back of the machine.

DI water ring line

The machine can be connected to a ring line system for DI water. For
this purpose, it must be technically adapted and the controls reset by
the Miele Customer Service Department.

Please contact the Miele Customer Service Department for further
information.

Содержание PG 8591

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды