Operation
39
Refilling or changing containers
The DOS module is equipped with a
level indicator which shows the
Refill
detergent
message in the display when
the level drops below the minimum.
As soon as the message appears in
the display, refill or replace the
container with a full one containing
the appropriate process chemical at
the end of the program.
Confirm the message with the
OK
button.
Replace the container in good time
to prevent the dispensing system
being emptied completely.
An empty dispensing system must
be vented before starting the next
program.
Place the container on the open
dishwasher door or on a surface
which is easy to clean.
Unscrew and remove the suction
lance. Place the suction lance on the
open dishwasher door.
Replace the empty container with a
full one.
Push the suction lance into the
opening of the container and screw it
on tightly. Observe the colour coding.
Wipe up any spilled process chemical
thoroughly.
Place the container on the floor
beside the dishwasher or in an
adjacent cupboard. The container
must be at the same level as the
machine and not be placed on top of
or above the dishwasher.
The DOS system must then be
vented.
To vent the system and adjust the
dosage amount, see
“Settings menu, External DOS”.
Checking consumption
Monitor the amount of process
chemicals used by regularly checking
the level in the container in order to
detect any dispensing irregularities.
