Cleaning and care
57
Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet retains coarse soil from
the suds solution. This prevents soiling
getting into the circulation system and
re-entering the chamber through the
spray arms.
This dishwasher must not be
used without all the filters in place!
Filters can become blocked by soiling
which collects over time. The level of
soiling and time it takes before the
filters need cleaning will vary depending
on use.
The message
Check filters
will appear in
the display after every 50 program
cycles (factory default setting).
You can set the interval for this
message to appear to between 30 and
60 program cycles (see “Settings menu,
Check filters”).
Check the filter combination.
Clean it, if necessary.
Then confirm the message with
OK
.
The message will go out.
Cleaning the filters
Turn the dishwasher off.
Turn the handle counter-clockwise to
release the filter system
.
Take the filter combination out of the
dishwasher
. Remove any coarse
particles and rinse the filter well
under running water.
If necessary, use a soft cleaning
brush to remove soiling.
Ensure that coarse soil does not
get into the circulation system and
cause a blockage.
