Miele PG 8130 U Скачать руководство пользователя

Страница: 61 / 92

Problem solving guide

Faults in the water intake or water drain

Problem

Possible cause and solution

One of the following
fault messages is
displayed:



Open water supply

The water supply is turned off.



Turn on the water supply fully.



Water intake

Before remedying the fault:



Turn the dishwasher off with the



button.

There is a problem with the water intake.



Turn on the water supply fully and start the
program again.



Clean the water intake filter (see “Maintenance”).



The flow pressure at the water connection is lower
than 30 kPa (4.35 psi).
Consult a plumber.

The following fault
message appears in the
display:



Drain

Before remedying the fault:



Turn the dishwasher off with the



button.

Water drainage fault.
There might be water in the wash cabinet.



Clean the filter combination (see “Cleaning and
care, Cleaning the filters”).



Clean the drain pump (see “Maintenance”).



Clean the non-return valve (see “Maintenance”).



Remove any kink or loop in the drain hose.

Содержание PG 8130 U





























































































Результаты поиска

Содержание PG 8130 U

Отзывы:

Похожие инструкции для PG 8130 U

Бренды по названию

Популярные бренды

Miele PG 8130 U, Руководство по эксплуатации

Результаты поиска

Содержание PG 8130 U

Отзывы:

Похожие инструкции для PG 8130 U

Бренды по названию

Популярные бренды