Programme options
45
FlexiTimer with EcoStart
With the FlexiTimer
you have three
options for starting the programme
using delay start. You can set the start
time or the finish time of a programme.
You can also use the
EcoStart
function
to benefit from cheaper electricity tariffs
at night.
When using the FlexiTimer function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme
, i.e. before you activate
the FlexiTimer with
OK
, and also
activate the door safety lock.
Switch on the dishwasher with the
button.
The
Start
indicator light will flash.
Select the programme you want to
use.
Press the
button.
You can use the
arrow buttons to
select the
Start at
,
Finish at
,
EcoStart
or
Back
functions.
Confirm selection of the function you
want with
OK
.
The current time of day will appear and
the hour number block will be
highlighted.
You can now enter the time you want
using the
arrow buttons and
confirm with
OK
.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu level. You will then have
to enter your settings again.
If the time of day (clock) display has
been switched off (see “Settings
menu, Time of day”) the display will go
out after a few minutes and only the
Start
indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.