Operation
41
Time display
The estimated duration of the
programme selected appears in the
display before the programme begins.
During the programme sequence, the
time left until the end of the programme
is displayed.
Symbols appear to indicate which stage
the programme is at:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed programme running time
may vary with the same programme. It
is influenced by, among other things,
the water temperature at each inlet, the
reactivation cycle of the water softener
and the amount of load items.
The programme running times shown in
the programme chart refer to standard
test loads and temperatures.
For each programme sequence, the
electronic module calculates the
running time required according to the
temperature of the water taken into the
dishwasher and the amount of load
items.
Energy management
To save energy the dishwasher will
switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
Press the
button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.