Operation
38
Refilling or changing containers
The dispensing module is equipped
with a level monitoring function.
Refill
detergent
will appear in the display when
the level drops below the minimum.
As soon as the message appears in
the display, refill or replace the
container with a full one containing
the appropriate process chemical at
the end of the programme.
Confirm the message shown with the
OK
button.
Replace the container in good time
to prevent the dispensing system
being emptied completely.
An empty dispensing system must
be vented before starting the next
programme.
Place the container on the open
dishwasher door or on a surface
which is easy to clean.
Take the lid off the media canister
and remove the suction lance. Place
the suction lance on the open wash
cabinet door.
Fill or replace the container, fit the
suction lance and secure the lid.
Observe the colour coding.
Feed the suction lance into the
canister until it reaches the bottom.
Wipe up any spilled process chemical
thoroughly.
Place the canister on the floor beside
the dishwasher or in an adjacent
cabinet. The container must be at the
same level as the machine and not be
placed on top of or above the
machine.
The dispensing system must then be
vented.
Checking consumption
Monitor the amount of process
chemicals used by regularly checking
the level in the container in order to
detect any dispensing irregularities.
