Miele PDR 908 HP Marine, Инструкции по эксплуатации и монтажу

Страница: 93 / 108

Supervisor level
93
Favourite programmes
After switching on, you can also select
a programme via:

Favourites.
12 programmes can be stored as fa-
vourites based on your own priorities
and requirements.
These favourites will also be made
available in the control options
– Launderette ext. (12 prog)
– Launderette, basic (4 prog) (the first
four of the 12 favourites).
The control options can be defined un-
der
Control .
Tip: You can assign a different colour to
each programme. In this case, the Prog.
colour allocation setting must be set to
On .
Changing favourite programmes

Select the programme you wish to
change or replace.

Confirm the programme or the setting
to be changed.
Another menu opens, enabling you to
select a new programme or change the
parameters.

Confirm using the Save sensor.
Your selection is now active.
Special programmes
You can put together five special re-
sidual moisture or time-controlled pro-
grammes and assign your own pro-
gramme names.
First, enter the programme name.

Select the special programme you
want to change.
The Save as menu opens.
 Use the letters and symbols below
the line to enter the name.

Touch the Save sensor.
You can now enter the parameters for a
 Res. moisture programme or 
Timed drying .
The five special programmes are pre-
programmed at the factory. You can
change these special programmes.
The special programmes are added to
the programme packages. Enter the
name and settings of your special pro-
gramme into the “Special pro-
grammes” table in the “Programme
overview” chapter.