Miele PDR 908 HP Marine, Инструкции по эксплуатации и монтажу

Страница: 67 / 108

Problem solving guide
67
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
The display indicates the following messages or faults
Message Cause and remedy

The drum is empty
or the laundry is too
dry.
lights up after a
programme has
been cancelled.
This is not an error.
In some programmes, if the drum has been under-
loaded or is empty, the programme will be cancelled.
This can also happen if the items are already dry.

Open the door and check the laundry.

Add items if necessary.

Close the door to resume drying.
Dry individual items using the Warm air timed drying
programme.

Power outage. Pro-
gramme stopped
There has been a power outage.

When power is resumed, confirm with OK .

Touch the Start/Stop sensor.

Open bottom right
grille, clean the heat
exchanger
lights
up at the end of a
programme.
The cooling fins behind the grille of the heat ex-
changer can become blocked with dust and dirt
drawn in from the surrounding area and the airways
can become blocked with fluff.
 Clean as described in “Cleaning and care” – “Bot-
tom right grille/heat exchanger”.

Also check and clean the filters in the filling area
and in the plinth.

To clear the message: Touch the OK sensor.