Miele lassic C1 SBxx3 Series, Руководство по эксплуатации

Страница: 38 / 120

en
38
To rewind the cable
 Switch off at the wall socket and re-
move the plug.

Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 17)

Press the On/Off foot control

.
During vacuuming

When vacuuming, in particular
fine dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc., electro-
static charges build up naturally. Un-
der certain conditions these charges
will be released. To avoid the un-
pleasant effects of these discharges,
a metal inlay has been incorporated
into the underside of the handle.
Please make sure that you keep your
hand in constant contact with this
metal strip during vacuuming (dia.
18).
To regulate the suction power
(dia. 19)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.

Curtains, fabric

Upholstery, cushions

Cut pile carpets, rugs and runners
 Energy-saving vacuuming. This
setting is also very quiet
 Loop pile carpet and rugs
 Hard flooring and heavily soiled
carpets and rugs

Turn the suction power selector
manually to the suction power setting
you require.
To open the air inlet valve (dia. 20)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to man-
oeuvre. Close the valve when you are
ready to use full power again.
Setting down and storing the
vacuum cleaner
Park System for pauses during vacu-
uming (dia. 21)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during brief pauses.
 Slot the floorhead into the slot in the
parking attachment.