Miele KWT6832SGS Скачать руководство пользователя страница 20

Страница: 20 / 72

Sabbath mode

The appliance offers a Sabbath mode
for the purposes of religious
observance.

The following are turned off:

– the interior lighting when the door is

opened,

– all acoustic and optical signals,

– the temperature display,

– DynaCool (if previously turned on)

The following can be selected:

– the settings sensor for turning off

Sabbath mode

– and the On/Off button

The Sabbath mode function will turn
itself off automatically after approx. 120
hours.

Temperature regulation is limited in
Sabbath mode.

Ensure that the doors are properly
closed, as optical and acoustic
alarms are turned off. Any power
failure during this time is not shown in
the display. After a power failure, the
appliance restarts in Sabbath mode.

Turning on Sabbath mode

Touch the settings button.

All symbols available for selection will
appear in the display and the

symbol

flashes.

Touch the buttons for setting the
temperature (

) repeatedly until

the

symbol flashes in the display.

Touch the OK button to confirm your
selection.

The last selected setting flashes in the
display and the

lights up.

By touching the

button, you

can now turn on Sabbath mode. To
do this, select setting

Touch the OK button to confirm your
selection.

Selecting additional settings

Содержание KWT6832SGS









































































Результаты поиска

Содержание KWT6832SGS

Отзывы:

Бренды по названию

Популярные бренды

Miele KWT6832SGS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT6832SGS

Отзывы:

Бренды по названию

Популярные бренды