Miele KWT6832SGS Скачать руководство пользователя

Страница: 13 / 72

Normal
energy consumption

Increased
energy consumption

Installation /
Maintenance

In a well-ventilated room.

In an enclosed,
poorly ventilated room.

Protected from direct
sunlight.

In direct sunlight.

Away from heat sources
(radiator, range/oven).

Near a heat source (radiator,
range/oven).

Where the room temperature
is ideal, i.e. around 68°F
(20°C).

Where the room temperature
is higher.

Do not block the ventilation
openings, and keep them
free of dust.

Where the ventilation
openings are blocked and
full of dust.

Compressor and metal grill
(heat exchanger) at the back
of the appliance dusted at
least once a year.

Dust build-up on the
compressor and metal grill
(heat exchanger).

Temperature
setting

50°F to 54°F / 10°C to 12°C

The lower the temperature in
the appliance, the higher the
energy consumption.

Use

Wooden shelves arranged
as they were when the
appliance was delivered.

Only open the door when
necessary and for as short a
time as possible.
Store wine bottles in an
organized way.

Frequent opening of the
door for long periods will
cause a loss of coldness.
The appliance works harder
to cool down and the
compressor runs for longer
periods.

Do not overfill the appliance
in order to allow the air to
circulate.

How to save energy

Содержание KWT6832SGS









































































Результаты поиска

Содержание KWT6832SGS

Отзывы:

Похожие инструкции для KWT6832SGS

Бренды по названию

Популярные бренды

Miele KWT6832SGS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT6832SGS

Отзывы:

Похожие инструкции для KWT6832SGS

Бренды по названию

Популярные бренды