Miele KFN 14927 SD ed Скачать руководство пользователя

Страница: 55 / 68

Slide soft-close mechanism bracket

as far as it will go towards the

handle side of the door, and undo
screws

on the soft-close

mechanism.

Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.

Then place it to one side.

Removing the upper door:

Gently loosen cover

by carefully

inserting a flat-bladed screwdriver
into the gap.

Remove cover

together with

retainer

Then separate retainer

from cover

, by pushing it slightly to the left

and then pulling the cover forwards
and off.

Rotate

by 180°.

Then fit cover

from the front over

retainer

, and push it over to the

right. The writing must be visible.

Unscrew hinge part

, turn through

180° and fit to the opposite side. If
necessary drill pilot holes for the
screws.

Remove cover

by sliding it

forwards from the back and then
lifting it off.

Remove cover

by pulling it

upwards.

Changing the door hinging

Содержание KFN 14927 SD ed





































































Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды

Miele KFN 14927 SD ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды