Miele KFN 14927 SD ed Скачать руководство пользователя

Страница: 17 / 68

Switching the sensor tones on/off

The sensor tone which sounds each
time a sensor is touched can be
deactivated.

Touch and leave your finger on the

sensor.

At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 5 seconds until

appears in

the display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

By touching the

sensor, you can

now select whether the sensor tones
are switched on or off:

0: The sensor tones are deactivated

1: The sensor tones are activated

-: Return to menu

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm a
new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

You have now left the settings mode.

Activating or deactivating the safety
lock

The safety lock can be activated to
prevent the appliance being switched
off inadvertently.

Touch and leave your finger on the

sensor.

At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 5 seconds until

appears in

the display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

By touching the

sensor, you can

now select whether the safety lock is
switched on or off:

u 0

: The safety lock is deactivated

u 1

: The safety lock is activated

–: Return to menu.

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm a
new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

Switching on and off

Содержание KFN 14927 SD ed





































































Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды

Miele KFN 14927 SD ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды