Miele KFN 14927 SD ed страница 56 Скачать руководство пользователя

Страница: 56 / 68

Caution. The upper door is not
secure as soon as the upper hinge
plate is removed.

Close the upper door.

Undo screws

in upper hinge plate

and pull it upwards and off.

Carefully lift the upper door off and
place it to one side.

Make sure that you leave the hinge
pin in the hinge plate in the middle of
the appliance, as otherwise the lower
door will be unsecured.

Then fit cover

together with

retainer

on the opposite side.

Refit cover

on the opposite side.

Removing the lower soft-close door
mechanism:

Open the lower door.

Prise open

from the soft-close

mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.

Take care not to damage the door
seal.
If the door seal becomes damaged,
the door will no longer close
properly and cooling will be
impaired.

Slide panel

towards the appliance,

and leave it hanging between the
door and the appliance.

Fit restraining clip

(supplied with

the appliance) onto soft-close
mechanism

The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.

Carefully remove cover

from the

side using a flat-bladed screwdriver.

With the help of another person, tip
the appliance back slightly.

Changing the door hinging

Содержание KFN 14927 SD ed





































































Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды

Miele KFN 14927 SD ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды