Miele KFN 14927 SD ed Скачать руководство пользователя

Страница: 61 / 68

Replacing the upper soft-close door
mechanism:

Remove cover

from panel

rotate it by 180° and refit it on the
other side.

Insert the soft-close mechanism back
into the door, starting at the right
hand side.

Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.

The screw holes on the left and right
must line up perfectly.

First screw the soft-close mechanism
onto the appliance side, then onto
the handle side

, pushing it firmly

towards the appliance.

Attach panel

to soft-close

mechanism bracket

Push the cover

on from the side so

that the openings for the pin

are

vertically aligned.

Align bracket

to the hinge plate,

and insert pin

from above so that

the right angle fits into the recess.

Clip cover

into position.

Changing the door hinging

Содержание KFN 14927 SD ed





































































Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды

Miele KFN 14927 SD ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD ed

Отзывы:

Похожие инструкции для KFN 14927 SD ed

Бренды по названию

Популярные бренды