Miele KFN 14923 SDE ed Скачать руководство пользователя страница 50

Страница: 50 / 72

. . . "

" appears in the temperature

display.

The demonstration function is activated.

Call the Service Department.

. . . you cannot switch the ice cube
maker on.

Check whether the appliance is
connected to the electricity supply.

. . . the ice cube maker is not
producing any ice cubes.

Check whether the ice cube maker is
switched on.

Check whether the freezer section is
switched on.

Check whether there is enough water
in the water container.

Check that the water container has
been pushed into its holder correctly.

Check that the ice cube drawer has
been closed properly.

Remember it can take up to 24 hours to
produce the first ice cubes.

. . . the indicator light on the ice cube
maker flashes.

Fill the water container with cold,
fresh tap water.

If the indicator light on the ice cube
maker flashes when the water container
is full, there is a fault.
Call the Service Department.

. . . the ice cube maker is only
producing small ice cubes.

The size of ice cubes which are
produced over a certain period of time
will depend on the water pressure
present.

If the ice cube maker is only producing
small ice cubes the water pressure is
low.

Lengthen the water intake time for the
ice cube maker (see "Making ice
cubes").

. . . you cannot switch the appliance
off.

The safety lock has been activated.

. . . the interior lighting in the
refrigerator section is not working.

Was the door left open for too long?
The lighting switches itself off
automatically after approx. 15
minutes if the door is left open.

If this is not the case, then the interior
lighting is defective.

Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.

Problem solving guide

Содержание KFN 14923 SDE ed









































































Результаты поиска

Содержание KFN 14923 SDE ed

Отзывы:

Похожие инструкции для KFN 14923 SDE ed

Бренды по названию

Популярные бренды

Miele KFN 14923 SDE ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KFN 14923 SDE ed

Отзывы:

Похожие инструкции для KFN 14923 SDE ed

Бренды по названию

Популярные бренды