^
Attach panel
b
to soft-close
mechanism bracket
d
.
^
Align bracket
d
to the hinge plate,
and insert pin
e
from above so that
the right angle fits into the recess.
^
Click cover
f
back into place.
Make sure that cover
f
fits properly so
that the door can be closed without
hindrance and the pin is protected.
^
Remove retaining clip
g
.
^
Replace panel
b
onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^
Close the lower appliance door.
Refitting the upper door:
^
Then fit the top door on middle hinge
pin
i
.
^
Close the upper door.
^
Fit hinge plate
n
onto the opposite
side and secure it with screws
m
.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
^
Refit cover
k
on the opposite side.
^
Align the door with the appliance
housing using the long slot in the
lower hinge plate. Then tighten the
screws.
Changing the door hinging
65
Содержание KFN 14923 SDE ed
Страница 57: ...Appliance dimensions A B C KFN 14923 SDE ed 2011 mm 600 mm 630 mm Installation 57 ...
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 2008 KFN 14923 SDE ed M Nr 07 00 ...