Replacing the upper soft-close door
mechanism:
^
Remove cover
a
from panel
b
,
rotate it by 180° and refit it on the
other side.
^
Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^
Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.
^
First screw the soft-close mechanism
onto the appliance side, then onto
the handle side
c
, pushing it firmly
towards the appliance.
^
Attach panel
b
to soft-close
mechanism bracket
d
.
^
Push the cover
e
on from the side so
that the openings for the pin
f
are
vertically aligned.
^
Align bracket
d
to the hinge plate,
and insert pin
f
from above so that
the right angle fits into the recess.
^
Clip cover
e
into position.
Changing the door hinging
66
Содержание KFN 14923 SDE ed
Страница 57: ...Appliance dimensions A B C KFN 14923 SDE ed 2011 mm 600 mm 630 mm Installation 57 ...
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 2008 KFN 14923 SDE ed M Nr 07 00 ...