Moisture Plus
71
Starting residual moisture
evaporation immediately
Danger of injury caused by
steam.
Steam can cause severe scalding.
Do not open the door during a burst
of steam.
Select an oven function or an
Automatic programme that uses the
addition of moisture.
The
Evaporate residual moisture?
query
will appear.
Select
Yes
.
Evaporate residual moisture
and a time
appear in the display.
The residual moisture evaporation
process will start. You can follow the
time counting down in the display.
The time shown in the display will
depend on the amount of residual water
left in the system. During the
evaporation process, the duration may
be adjusted by the system according to
the actual amount of water present.
At the end of the residual moisture
evaporation process
Finished
will
appear.
Select
Close
.
A cooking programme with a function or
an Automatic programme that uses
moisture can now be run.
While the residual water is evaporating,
the moisture will condense on the door
and in the oven interior. This moisture
needs to be wiped off after the oven
has cooled down.
Skipping residual moisture
evaporation
Skipping the residual moisture
evaporation process can, in certain
cases, cause water to overflow into
the oven compartment.
It is best not to cancel the
evaporation process.
Select an oven function or an
Automatic programme that uses the
addition of moisture.
Evaporate residual moisture?
appears in
the display.
Select
Skip
.
A cooking programme with a function or
an Automatic programme that uses
moisture can now be run.
You will be prompted to carry out the
evaporation of residual water the next
time you select the function or an
Automatic programme that uses
moisture, and when you switch the
oven off.
Содержание H 7860 BPX
Страница 127: ...Installation I N S T A L L A T I O N 127 Side view ...
Страница 144: ...M Nr 11 193 980 01 en AU NZ H 7860 BPX ...