Miele H 378 B2, Руководство по эксплуатации

Страница: 54 / 72

To clean at high temperatures
Before cleaning the catalytic panels
using high temperatures, make sure
that all PerfectClean surfaces have
been cleaned as previously
described. Otherwise, the high
temperatures can cause deposits to
become baked on to the
PerfectClean surfaces and become
impossible to remove.
If, after manual cleaning, the oven is
still heavily soiled, heating it to a high
temperature will help remove further
soiling caused by oil and grease
splashes from the catalytic surfaces.
Note that deposits of spices, syrups
and similar substances are not
removed by this process. These should
be removed while fresh by hand with a
mild solution of hot water and washing
up liquid applied with a soft brush.
^
Turn the oven function selector to
"Fan heat
D
" or "Conventional heat
A
".
^
Turn the temperature selector to the
highest setting.
^
Run the oven for approx. 1 hour. The
length of time will depend on the
level of soiling.
^
It is a good idea to set the finish time
for the process using the timer. This
way you will not forget to switch the
oven off at the end.
Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.
Should the catalytic enamelling on
the back panel, side liners or the
roof liner become ineffective through
improper use or heavy soiling, a
replacement can be obtained from
your Miele dealer or the Miele Spare
Parts dept.
Cleaning and care
54