. . . spots like rust appear on catalytic
surfaces.
When roasting on the rack, the
circulating air sometimes picks up
spices, which are then deposited on
the oven interior walls. Such residues
are not removed by catalytic cleaning,
they are best removed while fresh with
a mild washing up liquid and a soft
brush.
. . . "F" and a number appear in the
oven display.
This combination indicates a fault
^
If
"F3"
appears the core temperature
(roast) probe has a fault.
Remove the probe from its socket
and the message will disappear.
^
If
"F6"
appears the oven has
automatically switched itself off
during use. This is a safety feature to
protect the oven if it has been
operating for an exceedingly long
period. The length of time depends
on the oven function selected.
The oven can be used again immedi-
ately by simply turning the oven
function selector to "0" and then
entering the process again.
^
If
"F9"
appears in the display, this
may mean that the maximum
temperature of the appliance has
been exceeded.
The appliance automatically switches
itself off temporarily. As soon as the
temperature has fallen to an
acceptable level the fault message
disappears. The appliance switches
itself on again automatically.
If this fault message occurs
repeated-ly, please inform the Ser-
vice dept. Please quote the fault
message.
– If
any other fault message
appears
in the display, this will need a service
visit. Please quote the fault message.
. . . the timer display does not light up
when the oven is operating.
This is not a fault.
The display does not light up if the time
of day display has been switched off.
Press "
f
" and "
)
" at the same time.
"12:00" appears in the display field.
. . . the time of day cannot be re-set
after a power cut.
This is not a fault.
Check whether the function selector is
still set to one of the functions. If it is,
turn it to the "0" position.
The time of day can now be re-set.
. . . the energy-save function is not
activated when cooking with the
roast probe or the timer.
This is not a fault.
Certain conditions must be fulfilled before
the system controlling the energy-save
function comes into operation.
Sometimes these do not occur.
. . . the residual time indicator is not
activated when cooking with the
roast probe.
This is not a fault.
Certain conditions must be fulfilled
before the system controlling residual
time comes into operation. Sometimes
these do not occur.
Correcting minor faults
62
Содержание H 378 B2
Страница 4: ...General view Description of the appliance 4 ...
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 22 4004 H 378 B2 H 378 1 B2 M Nr 05 848 990 06 en GB ...