Turbo
The "Turbo" function is used to reduce
the duration of programmes in which
this function is available.
In order to achieve optimum cleaning
results, consumption rates are
increased with this option.
^
Switch the dishwasher on using the
K
button.
The Start/Stop indicator light will flash.
^
Press the Turbo button.
The Turbo indicator light will come on.
The option selected is active on all
programmes until the setting is
changed.
^
You can now start a programme or
switch the dishwasher off using the
K
button.
Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^
Switch the dishwasher off using the
K
button.
^
Press the Start/Stop button in and
whilst holding it in
switch the
dishwasher on using the
K
button.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the Delay start button twelve
times.
The lowest programme indicator will
give one long flash and two brief
flashes at intervals.
The Wash/Rinse indicator light shows
whether a setting other than the factory
default setting has been set.
– If the Wash/Rinse indicator light is
flashing:
All settings are factory default
settings.
– If the Wash/Rinse indicator light is
not lit up:
At least one setting has been altered
from the factory default setting.
^
To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
Switch the dishwasher off using the
K
button.
Additional functions
34
Содержание G4302 SCU
Страница 61: ...61 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved G4300 G4302 G4305 G4307 0511 M Nr 09 048 470 00 ...