Water inlet/drain fault
Problem
Possible cause
Remedy
The Inlet/Drain check
indicator flashes.
The stopcock is
closed.
Open the stopcock fully.
The dishwasher stops
during a programme.
The Inlet/Drain
indicator flashes.
Before rectifying the problem:
– Switch the dishwasher off
using the On/Off button
K
.
Water intake is
restricted.
– Open the stopcock fully.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
The water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
– Clean the filter combination.
See "Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve.
See "Maintenance".
– Remove any kink in the drain
hose.
Problem solving guide
43
Содержание G4302 SCU
Страница 61: ...61 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved G4300 G4302 G4305 G4307 0511 M Nr 09 048 470 00 ...