Standby
To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The indicator lights
and the display, if applicable, will go
out and only the Start/Stop indicator will
flash slowly.
^
To switch the indicators and display
on again, press any button (apart
from the On/Off button
K
).
This will switch off Standby.
The dishwasher will not switch into
Standby mode whilst a programme
is running, if salt or rinse aid needs
to be replenished or there is a fault.
At the end of the programme
The "End" indicator light will come on at
the end of the programme.
The drying fan will continue to run
for a few minutes at the end of the
Quick wash programme.
The dishwasher can now be opened
and unloaded (see "Unloading the
dishwasher").
,
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is
advisable to leave the door closed
until you are ready to unload the
crockery. Alternatively you can open
the door fully until the crockery is
cool enough to unload. Do not leave
the door only partially open.
Operation
32
Содержание G4302 SCU
Страница 61: ...61 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved G4300 G4302 G4305 G4307 0511 M Nr 09 048 470 00 ...