Program
Description
Custom
Open program available for programming by end user.
INORGANICA
For removing inorganic residue;
generally for analytical applications, for light to moderate soiling, with moderate
to high rinse requirements.
ORGANICA
For removing organic residue, such as oils, fats, wax, agar, preparation
applications and for some analytical applications with moderate to heavy soiling,
and moderate rinse requirements.
Liquid detergent required
, cold, warm, and a
DI water supply is recommended.
STANDARD
For a wide range of soiling types that do not denature or precipitate in alkaline
environments, for some preparation and analytical applications, for light soiling,
and low rinse requirements.
UNIVERSAL
For removing organic residue (such as proteins, oils and some fats) and some
inorganic residues (pH 7, water-soluble metallic salts), for preparation
applications and for some analytical applications, moderate to heavy soiling and
moderate rinse requirements.
INTENSIVE
For removing organic residue (such as proteins, cell and tissue cultures, oils and
some fats) and some inorganic residues (pH 7, water-soluble metallic salts), for
preparation applications and analytical applications, moderate to heavy soiling,
and with moderate to high rinse requirements.
PLASTIC
For temperature-sensitive labware, such as plastic bottles (minimum required
temperature resistance 131°F / 55 °C), for preparation applications and for some
analytical applications, for light to moderate soiling, for moderate rinse
requirements.
DRAIN
To pump away water, for example when a program is canceled.
RINSE
To rinse heavily soiled labware, e.g., to pre-treat heavy soiling, remove residue or
to avoid drying and encrusting before a full program is run.
varioTD
For cleaning and thermal disinfection at 199°F / 93 °C with 5 min holding time (as
per EN ISO 15883-1).
SPECIAL
93°C - 10'
For cleaning and thermal disinfection at 199°F / 93 °C with 10 min holding time
(as per §18 of Germany's infectious disease control act, section A/B, fungicidal,
bactericidal, and virus-inactivating).
CW = cold water, HW = hot water, DW = distilled water, °C = Temperature, min = holding time
* The DOS 2 rinse aid dosage must be activated through Miele Technical Service
Program guide
38
