^
Wipe any residual salt off the screw
threads and seal of the reservoir.
^
Screw the cap on securely.
^
Immediately after this step
, start the
"Rinse" program, to remove any
traces of salt from the inside of the
lab washer.
Note:
There may be a delay of a few
minutes before the "Rinse" program
starts due to the reactivation of the
water softener.
Salt indicator
When the salt reservoir is empty, the
"Recharge Softener" indicator
b
lights
to remind you to fill the reservoir.
Reactivation takes place automatically
as needed during a program. The
"Recharging" indicator
a
lights while
this is occurring.
Water softener
16
