background image

Temperature alarm

21

The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed.

Health risk caused by decom-

posing food.
If the temperature in the freezer re-
mains above -18 °C for a long time,
the frozen food can start to defrost.
This will reduce the storage life of the
food.
Check whether the frozen food has
started to defrost. If it has, check
that the food is safe to use and if it
is, use it as soon as possible or cook
it before freezing it again.

If the temperature in the freezer be-
comes too warm, the temperature dis-
play and the alarm symbol 

 will flash.

An alarm will also sound.

The temperature the refrigeration appli-
ance is set at determines the temperat-
ure the appliance recognises as being
too warm.

The audible and visual signals will be
activated if:

– You switch on the refrigeration appli-

ance and the temperature in a tem-
perature zone differs greatly from the
set temperature.

– A lot of warm room air enters the

freezer when you are rearranging or
taking out frozen food.

– You are freezing large amounts of

food at once.

– You are freezing warm food.

– There was a mains outage.

– The refrigeration appliance has a

fault.

The alarm will stop and the alarm sym-
bol 

 will go out as soon as the tem-

perature has dropped down to the cor-
rect level again.

Switching the temperature
alarm off early

If the noise disturbs you, you can
switch the alarm off if you wish.

Press the Alarm off button.

The alarm will stop. 
The alarm symbol 

 will remain illu-

minated until the set temperature has
been reached.

The alarm cannot be switched off
early in Settings mode.

Содержание F 32202 i









































































Отзывы: