Miele F 32202 i, Инструкции по эксплуатации и монтажу

Страница: 58 / 72

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
58
 Push the appliance into the niche un-
til all fixing brackets at the top and
bottom are in line with the front edge
of the housing unit side wall.
–

With 16 mm thick walls:
The spacers should touch the front
edge of the housing unit side walls at
the top and bottom.
–

With 19 mm thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the housing unit side
wall.
This will create a gap all round of
42 mm to the front edges of the hous-
ing unit side walls.
Important for furniture with door fit-
tings (e.g. stubs, seals, etc.).
Take the dimensions of the fittings
into account.
Check to make sure there is a gap all
round of
42 mm to the front edges of
the door fittings.

Pull the refrigeration appliance for-
wards by the appropriate dimension.
Tip: If possible, remove the door fittings
and push the refrigeration appliance
into the niche until all fixing brackets at
the top and bottom are touching the
front edge of the housing unit side wall.

Align the appliance on both sides by
altering the adjustable feet using the
spanner supplied.