Miele F 32202 i Скачать руководство пользователя

Страница: 32 / 72

Cleaning and care

Preparing the refrigeration ap-
pliance for cleaning



Switch the refrigeration appliance off.

The display goes out and the cooling
function is switched off.



Switch off at the wall and withdraw
the plug from the socket, or discon-
nect the mains fuse.



Take any food out of the refrigeration
appliance and store it in a cool place.



Defrost the freezer (see “Defrosting”).



Take out all other removable parts for
cleaning.

Cleaning the interior and ac-
cessories

The refrigeration appliance should be
defrosted and cleaned regularly, or at
least twice a year.

Remove soiling immediately to pre-
vent it from drying on.

The best time to do so is when:

– There is very little or no frozen food

left in the freezer zone.

– The humidity level in the room is low

and the ambient temperature in the
room is also low (cooler part of the
year).



Clean the

interior

with a clean

sponge, lukewarm water and a little
washing-up liquid.



After cleaning, wipe with clean water
and dry with a soft cloth.

The following parts

cannot be cleaned

in a dishwasher

– the freezer drawers



These accessories should all be hand
washed.

The following parts

are suitable

for

cleaning in a dishwasher:

The maximum temperature of the
dishwashing programme selected
must not exceed 55 °C.

Содержание F 32202 i









































































Результаты поиска

Содержание F 32202 i

Отзывы:

Похожие инструкции для F 32202 i

Бренды по названию

Популярные бренды

Miele F 32202 i, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание F 32202 i

Отзывы:

Похожие инструкции для F 32202 i

Бренды по названию

Популярные бренды