manualshive.com logo in svg

Miele F 1412 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 1412 Vi Скачать руководство пользователя страница 114

Frequently Asked Questions

114

Message

Possible cause and solution

“

F Please contact Miele

Technical Service.

” ap-

pears in the display and
an alarm sounds.

There is a fault.

Make a note of the fault message if necessary.

Contact Miele Service.

To turn the alarm off, touch the 

 symbol.

The error message does not disappear from the dis-
play until the error has been rectified.

The voltage level is too high/low.

Observe the connection data under “Electrical
connections”.

Contact Miele Service if necessary.

To turn the alarm off, touch the 

 symbol.

The error message does not disappear from the dis-
play until the error has been rectified.

 is shown in the dis-

play. The machine does
not get cold, but the
machine controls are
working.

Demo Mode

 

 is switched on. Demo mode allows the

appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.

Switch off Demo mode 

 (see “Selecting additional

settings”, section “Switching off 

Demo Mode

 

”).

Содержание F 1412 Vi





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды