manualshive.com logo in svg

Miele F 1412 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 1412 Vi Скачать руководство пользователя страница 110

Frequently Asked Questions

110

Problem

Possible cause and solution

The compressor is turn-
ing on more frequently
and for longer periods
of time; the temperature
in the refrigeration ap-
pliance is too low.

The ventilation gaps in the cabinetry have been cov-
ered or become too dusty.

Do not block the ventilation gaps.

Clean the ventilation gaps on a regular basis to re-
move any dust.

The appliance door has been opened too frequently,
or a large amount of fresh food has been placed in-
side or frozen at the same time.

Only open the appliance door when necessary and
for as short a time as possible.

After a while, the temperature will return to normal by
itself.

The appliance door is not properly closed.
A thick layer of ice may have already formed in the
freezer zone.

Close the appliance door.

After a while, the temperature will return to normal by
itself.

If a thick layer of ice has already formed, this will af-
fect cooling and increase energy consumption.

Defrost the appliance and clean it.

The ambient temperature is too high. The higher the
ambient temperature, the longer the compressor has
to run.

See the information in the section on “Installation –
Installation location”.

The refrigeration appliance was not properly installed
in the building-in niche.

See the information in “Installation” and “Installing
the refrigeration appliance”.

Содержание F 1412 Vi





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды