Miele CVA 4070 EN-CA Скачать руководство пользователя страница 26

Страница: 26 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

2. Push the lid back and fill the container with roasted coffee beans.

3. Push the lid back into place and put the beans container back into the

or.

3.6

Filling Ground Coffee

ovided in case you would like to prepare a

appliance.

Close the do

A funnel for ground coffee is pr
different coffee type, e.g. decaffeinated coffee.

Figure 3-4:

CVA4070 Ground Coffee Funnel Lid

1. Pull the container for the ground coffee out of the appliance and lift

nful of ground coffee into the funnel,(using the

ce and close the door.

See "Making Coffee - Espresso and coffee made from ground coffee".

Adjusting the Dispenser Height

To prevent the coffee or espresso from cooling prematurely and to

nimize

the funnel lid.

Place one spoo

supplied spoon) and close the lid.

Push the container into the applian

The lines must be rinsed daily before the first use. This will happen
automatically if "Rinse automatic" is set to "On" (see "Settings - Rins
Automatic") and the machine is cold. After heating, hot water runs out o
the two spouts into the drip tray.

achieve a better crema the coffee dispensers can be adjusted to mi
the distance to the cup.

Содержание CVA 4070 EN-CA




































































































































Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Похожие инструкции для CVA 4070 EN-CA

Бренды по названию

Популярные бренды

Miele CVA 4070 EN-CA, Техническая информация

Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Похожие инструкции для CVA 4070 EN-CA

Бренды по названию

Популярные бренды