Miele CVA 4070 EN-CA Скачать руководство пользователя страница 100

Страница: 100 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.4

Timer – Set / Activate

Initial requirements

1. Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear.

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

1. Touch pad next to

Clock Timer.

2. Touch pad next to the desired activation.
3.

Back (without saving)

: Touch pad

Clear.

To Set
switch on at:

If the timer is activated, the appliance will be switched on at

the specified time. Enter the desired time via the touch pads + or –.

switch off after:

The appliance will be switched off after the specified

time has elapsed. Enter the desired time via the touch pads + or –.
Factory setting: 2:00 hours.

switch off at:

If the timer is activated, the appliance will be switched off at

the specified time. Enter the desired time via the touch pads + or –.

To Activate
on:

Switches the feature on at a given time.

off:

Switches the feature off at a given time.

Save and quit

Save and back:

Touch pad next to

OK.

End:

Touch pad

On/Off.

Quit (without saving)

1. Touch pad On/Off.

100

Содержание CVA 4070 EN-CA




































































































































Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Бренды по названию

Популярные бренды

Miele CVA 4070 EN-CA, Техническая информация

Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Бренды по названию

Популярные бренды