Miele CVA 4070 EN-CA Скачать руководство пользователя страница 109

Страница: 109 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.12

System Lock – Set

Initial requirements

1. Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear.

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

1. Touch pad next to

System lock.

2. Touch pad next to the desired setting.
3. Back (without saving): Touch pad

Clear.

accept:

The system lock is switched on. The appliance can be

safeguarded against accidental operation.

do not accept:

The system lock is switched off.

Factory setting:

do not accept.

Save and quit

Save and bac

k: Touch pad next to

OK.

End:

Touch pad

On/Off.

Quit (without saving)

1. Touch pad

On/Off.

109

Содержание CVA 4070 EN-CA




































































































































Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Бренды по названию

Популярные бренды

Miele CVA 4070 EN-CA, Техническая информация

Результаты поиска

Содержание CVA 4070 EN-CA

Отзывы:

Бренды по названию

Популярные бренды