Miele 51514001AUS Скачать руководство пользователя страница 57

Страница: 57 / 64

Supervisor level

Programme
packages

The selection of programmes can be expanded by activating single
programmes from the target group programme packages.

The programmes selected from the programme packages (marked in
orange) are displayed during programme selection.

Sort programmes

Programmes can be moved within the programme list and in the
Favourites list.

Factory default: Off

Moving
programmes



Touch the sensor control for the programme you want to move.



Press and hold the sensor until the frame changes.



Drag the programme to the required position.

Prog. colour
allocation

You can assign a colour to a Favourite programme. In the Favourites
list, each Favourite programme is given a coloured frame, which can
be adjusted.

Factory default: On

Hygiene

If a programme at a temperature below 60°C has been used, the
prompt to start the

Maintenance wash hygiene

programme will appear

in the display.

Factory default: Off

Expert code

A code needs to be entered to cancel a disinfection programme. The
code can be changed.

The code is: 0 0 0

Make a note of your new code if you ever change it.

Содержание 51514001AUS

































































Результаты поиска

Содержание 51514001AUS

Отзывы:

Похожие инструкции для 51514001AUS

Бренды по названию

Популярные бренды

Miele 51514001AUS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание 51514001AUS

Отзывы:

Похожие инструкции для 51514001AUS

Бренды по названию

Популярные бренды