Miele 51514001AUS Скачать руководство пользователя страница 31

Страница: 31 / 64

Timer

The Timer can be used to select the time at which a programme
starts or finishes.

Setting the timer



Touch the

 Timer

sensor.



Select the

Finish at

Start in

, or

Start at

option.



Set the hours and the minutes and confirm your entry with the

sensor.

Changing the Timer

The selected delay start time can be changed before the programme
starts.



Touch the







sensor.



Change the time set and confirm with the

sensor.

Deleting the timer

The selected Delay start time can be cancelled before the programme
starts.



Touch the







sensor.

The selected Delay start time will appear in the display.



Touch the

Delete

sensor.



Confirm with the

sensor.

The selected Delay start time is deleted.

Starting the timer



Touch the

Start/Stop

sensor.

The door will lock and the time remaining until the programme starts
will appear in the display.

After the programme has started, the selected time can only be
changed or cancelled by interrupting the programme.

The programme can be started immediately at any time.



Touch the

Start immediately

sensor.

Содержание 51514001AUS

































































Результаты поиска

Содержание 51514001AUS

Отзывы:

Похожие инструкции для 51514001AUS

Бренды по названию

Популярные бренды

Miele 51514001AUS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание 51514001AUS

Отзывы:

Похожие инструкции для 51514001AUS

Бренды по названию

Популярные бренды