Miele 51508264IRL, Инструкции по эксплуатации и монтажу

Страница: 51 / 96

Problem solving guide
51
Programme cancellation and error message
Problem Cause and remedy

Water drainage fault.
The drain is blocked or restricted.

Call Miele Service.

Water intake fault.
Open stopcock.
The water inlet is blocked or restricted.
 Check whether the stopcock has been properly
opened.

Check whether the inlet hose is kinked.
The water pressure is too low.
 Switch on the
Low water pressure
setting (see “Low
water pressure” under “Supervisor level”).
The filters in the water inlet are blocked.
 Clean the filters (see “Cleaning the filters” under
“Cleaning and care”).
 Waterproof system
activated
The water protection system has reacted.
 Close the stopcock.
 Call Miele Service.

Disinfection temper-
ature not reached
The required temperature was not reached during the
disinfection programme.

The washing machine has not carried out the dis-
infection cycle correctly.

Start the programme again.

Fault F . If restart
fails, call Service
There is a fault.
 Disconnect the washing machine from the electri-
city supply.

Wait at least 2 minutes before reconnecting the
washing machine to the electricity supply.

Switch the washing machine on again.

Start the programme again.
If the fault message appears again, contact Miele
Service.