Miele 51508264IRL Скачать руководство пользователя

Страница: 43 / 96

Extras

You can add Extras to the wash pro-
grammes.

Not all Extras can be selected with
every programme. If an Extra is not lis-
ted, it is not permitted for use with the
wash programme in question.

Selecting Extras

For some programmes, an Extra is
offered directly in the main menu.



Touch the sensor of the Extra to ac-
tivate it.

For some programmes, you select Ex-
tras in the

Extras

sub-menu.



Touch the

Extras



sensor.



Select one or two of the Extras avail-
able.

Pre-wash



A Pre-wash can be added for heavily
soiled laundry. Coarse soiling is
loosened and removed before the main
wash.

Pre-rinse



The laundry is rinsed before the main
wash to remove larger quantities of soil-
ing, e.g. dust, sand.

Rinse plus



An extra rinse can be activated to
achieve a better wash result.

Microfibre



Microfibre mops are gently cooled at
the end of the main wash cycle.

Содержание 51508264IRL

































































































Результаты поиска

Содержание 51508264IRL

Отзывы:

Похожие инструкции для 51508264IRL

Бренды по названию

Популярные бренды

Miele 51508264IRL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание 51508264IRL

Отзывы:

Похожие инструкции для 51508264IRL

Бренды по названию

Популярные бренды