Midtronics MCC-070, Инструкция по эксплуатации

Страница: 10 / 24

MCC-070 Controlled Charger
Midtronics BV Hoofdveste 6-8 3992 DG Houten www.midtronics.com
10
Chapter 1: Introduction & Overview
Safet y Reminder
For safe, efficient, and accurate charging and testing, review
the safety and operating instructions in this manual before
using the analyzer. In addition, follow all manufacturer
instructions and BCI (Battery Council International) safety
recommendations.
Safety Precautions
Inspect the battery for damages and check the electrolyte
level. If the electrolyte level is too low, replenish it and
fully charge the battery. Always use the necessary safety
precautions when working with batteries to prevent severe
injury or death. Follow all manufacturers’ instructions and
BCI (Battery Council International) safety recommendations,
which include the following precautions:
Risk of explosive gases.
Never smoke or allow a spark or
flame in the vicinity of a battery.
Batteries can produce a highly explosive mix
of hydrogen gas and oxygen, even when the
battery is not in operation. Always work in a
well-ventilated area..
Wash hands after handling.
REQUIRED BY CALIFORNIA PROP. 65: Battery posts,
terminals, and related accessories contain lead and lead
compounds, chemicals known to the state of California
to cause cancer and birth defects or other reproductive
harm.
9
Battery acid is highly corrosive. If acid enters your eyes, im-
mediately flush them thoroughly with cold running water
for at least 15 minutes and seek medical attention. If bat-
tery acid gets on your skin or clothing, wash immediately
with a mixture of water and baking soda.
9
Always wear proper safety glasses or face shield when
working with or around batteries.
9
Keep hair, hands, and clothing as well as the analyzer
cords and cables away from moving engine parts.
9
Remove any jewelry or watches before you start servicing
the battery.
9
Use caution when working with metallic tools to prevent
sparks or short circuits.
9
Never lean over a battery when testing, charging, or jump
starting.
9 Never charge a frozen battery. Gases may form, cracking
the case, and spray out battery acid.
Manual Conventions
This manual uses these symbols and typographical conventions:
Symbol Description
The safety symbol indicates instructions for
avoiding hazardous conditions and personal
injury.
The safety symbol with the words
CAUTION ,
WARNING, or DANGER indicates instructions
for avoiding hazardous conditions and
personal injury.
The wrench symbol indicates procedural notes
and helpful information.


These symbols indicate which arrow keys on
the keypad to press for a given function.
Bold Letters The text for screen options are in Bold letters.
Top View

  



Power Connection

Connector: Charge Cables

DC Output Circuit Breaker

USB Port

Serial Connector
(r LIN/CAN)

Charge Cable Quick
Connector Locking Posts
Chapter 1: Introduction & Overview