Midtronics GR8 1100, Инструкция по эксплуатации

Страница: 40 / 42

•
40
•
Here are a few things you can do to protect your test cables from damage and premature wear:
• The grease, dirt, and sulfation that build up on battery terminals are highly corrosive and can damage the clamps over time.
Before connecting the clamps, ensure accurate test readings and protect the clamps by cleaning the battery case and ter-
minals using a wire brush and a mixture of water and baking soda.
• Periodically clean the clamps using a mixture of baking soda and water, or a mild hand-soap, and a small bristle brush.
• Clean the battery terminals. If stud adapters are required, fasten them with the proper tool. Do not use the battery clamps
to tighten adapters.
• Never remove the clamps from a battery to abort an active charging session. Always press the red
STOP
button before
removing the clamps.
• Do not leave the clamps laying in battery acid.
• Hang the clamps on the cable wrap on the back of the GR8 when not in use.
Chapter 12: Test Cable Maintenance GR8 1100
Chapter 12: Test Cable Maintenance
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com