Midtronics GR8 1100, Инструкция по эксплуатации

Страница: 25 / 42

•
25
•
language
The LANGUAGE utility allows you to select a lan-
guage for the display and printouts. To set your
preference:
1. Use the
UP
( p ) or
DOWN
( q )
ARROW
key or press the
corresponding numerical key (1, 2, or 3) to move the dot
to the option button of your choice.
1
ENGLISH
2 ESPAÑOL
3 FRANÇAIS
2. If you used the ARROW keys, press the SAVE soft
key to save your setting or the BACK soft key to return
to the Setup Menu without saving the changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Format Disk
Select this utility to format an SD card to receive
data or erase all data on the card. The GR8 will warn
you before formatting the disk and ask if you want
to continue.
Update
This utility allows you to update the GR8 software
using an SD card.
admin
This section explains how to administer password
access to the GR8. It also describes functions that
clear test totals and restore settings to factory de-
faults.
Select the ADMIN icon to display a list of administrative
functions:
1 OPTIONS
2 CHANGE ADMIN PIN
3 CLEAR TEST TOTALS
4 RESET DEFAULTS
Options
In the OPTIONS section there are four functions that allow
you to control user access to the Main Menu and Setup Menu.
Each option is easily enabled or disabled by turning it ON or
OFF. To save your settings after each selection, press the
SAVE
soft key. To return to the administrative functions list without
saving, press the
BACK
soft key.
1 USER ID
Select this setting to enable (ON) or disable (OFF) the
USER ID login screen.
NOTE: When you turn off the USER ID, the USER
PIN option is automatically turned off.
2 PIN
Select this setting to enable (ON) or disable (OFF) the
USER PIN login screen.
3 UNREG. USER
Select this setting to enable (ON) or disable (OFF)
unregistered login access to the GR8 when option 1 –
USER ID is ON. When the option 2 – PIN is ON, the PIN for
USER ID UNREG is 0000 (4 zeros).
4 ADMIN
Select this setting to enable (ON) or disable (OFF) the
ADMIN PIN login screen that allows access to the Setup
Menu.
5 PRINT HEADER
Select this setting to enable (ON) or disable (OFF) printing
your shop information on the printout.
Change Admin PIN
This function allows you to change your five-digit Administrator
PIN. The GR8 will ask you to re-enter it correctly before it will
save. The default PIN is
12345
. If you forgot your Administrator
PIN, call Midtronics at 1.800.776.1995 for assistance.
Clear Test Totals
This function allows you to clear the test totals by User ID and
battery test decision. The GR8 will verify that you want the
counter reset to 0 before it continues.
NOTE:
This will not clear the LIFETIME total and
the LAST 100 LOG.
Chapter 4: Setup Menu GR8 1100
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com