22
SECURITY SETUP menu <6>
Security:
Allows the security option to be turned on and off. If off, the Lock/Unlock menus will not appear.
OFF
Disable
security
feature.
ON
Enable security feature.
Password:
Sets the password used to unlock the menu system when the security is enabled. Must be 4
numeric digits.
Range: 4
digits
Default: 0000
TONES SETUP menu <7>:
F10-F19 Entry:
By default, the TRC will expect one digit to be pressed after the FREQ key is pressed. This
however prevents the use of F10 – F19 function tones. If these tones are to be used, turn on this setting. This
will cause the TRC to wait 2 seconds after FREQ <1> is pressed for the 2
nd
digit. If no 2
nd
digit is entered after
2 seconds (or SEND is pressed), F1 will be selected.
OFF
Disable F10 – F19 entry.
ON
Enable F10 – F19 entry.
Tone Timing:
This menu allows the modification of the default timing of the frequency/function tones, the high
level guard tone, and the monitor tone. Any of these tone types may be disabled by setting the timing to 0000.
All four digits must be entered.
Freq/Func Tone
Range:
0000 to 9999 milliseconds
Default: 0040
milliseconds
Hi Level Guard
Range:
0000 to 9999 milliseconds
Default: 0120
milliseconds
Monitor Tone
Range:
0000 to 9999 milliseconds
Default: 0040
milliseconds
Guard Tone:
This changes the guard tone frequency. All four digits must be entered.
Range:
2100 to 3100 Hz
Default: 2175
Monitor Tone:
This changes the guard tone frequency. All four digits must be entered.
Range:
0550 to 3100 Hz
Default: 2050
FreqFunc Tones:
This allows editing the attributes for each of the frequency/function tones F1 – F19. There
are three attributes of each tone that you can change. The defaults for each tone are shown in the table
below.
Freq/Func Number:
Select the Freq/Func tone number whose attributes you with to edit using the
SCROLL buttons. When the desired tone number is displayed, press SEND. You will then be prompted to
modify or accept each of the three attributes associated with that tone. To leave an attribute unchanged,
simply press SEND to accept the value. All three attributes must be modified or accepted for the changes
to take effect.
Frequency setting:
This allows you to pick a custom frequency for each tone. Note that all four digits
must be entered.
Range:
0550 to 3100 Hz
Default: see
below
